VGAsoft logo

VGAsoft | Разработка программного обеспечения

HomeContact us


English ⇔ Russian
 
LMBomber
Dictionary
Speech
Download
Forum

Перевод слова


Перевод: nozzle speek nozzle


[существительное]
носик ; носик чайника; горлышко; нос ; рыло; патрубок ; сопло; форсунка ; насадка ; наконечник ; выпускное отверстие; розетка подсвечника ; конус ; дюза


Тезаурус:

  1. It seems a pity that the gun does not come with a reflector nozzle (to work near window panes without cracking the glass, for example), but this is only a minor point.
  2. Connect the nozzle to the mixer unit, then position the tap assembly under the basin as a unit and screw the flanges of the tap headwork to the tap heads
  3. Using the gun is exceptionally easy, thanks to a "long reach" trigger which exerts enough pressure to push the melted glue through the nozzle at a steady rate.
  4. As importantly, a fully enclosed heating element and rubber nozzle guard make it difficult for users to accidentally burn themselves.
  5. "Relax, it's styptic," Alix said, waving a hissing nozzle.
  6. Use a piece of fine wire to clear only obstruction and replace the nozzle
  7. To prevent the valve of an aerosol can becoming clogged, turn it upside down after use and press the nozzle for a couple of seconds, then give it a wipe with a cloth dipped in white spirit.
  8. Sweetman crowed with laughter, but too soon, for, just as it seemed as though Ellen's gesture had indeed collapsed into an ignominious anti-climax, the extinguisher first coughed, then spat a vicious deluge of white muck that fanned from the flared nozzle to splatter spectacularly against Sweetman's chest.
  9. There was a gulp from the extinguisher's valve and a trickle of yellow-white liquid dribbled pathetically from its nozzle.
  10. After one second, controls in the nozzle of the rocket motor start steering the missile on to the proper trajectory.
  11. Changing from a conventional tankers splashplate to a low-trajectory nozzle is one way of making slurry spreading more environment-friendly.
  12. No diffuser - just a nozzle attachment to direct the airflow where you want it.
  13. When the trigger is pulled the adhesive having been heated to melting point is squeezed out of the front nozzle.

MAGIA Site Design

    Copyright © 1986-2024 VGAsoft. All rights reserved.

About USPrivacy