VGAsoft logo

VGAsoft | Разработка программного обеспечения

HomeContact us


English ⇔ Russian
 
LMBomber
Dictionary
Speech
Download
Forum

Перевод слова


Перевод: armhole speek armhole


[существительное]
пройма


Тезаурус:

  1. This is obviously correct if you are working from the actual body measurements, but it is of no use when you want to enter measurements taken from a diagram where only an armhole depth measurement is given.
  2. However, I am very pleased to hear that version 5 will allow you to choose to enter either an arm scye or an armhole depth measurement.
  3. Entering the measurements is quite straightforward, except when it comes to the armhole measurement for set-in sleeves.
  4. In the case of a set-in sleeve style however, the program will allow you to design a sleeve head larger than the armhole, for the purposes of gathering or pleating in.
  5. Stitch sleeves to armhole edges of fronts and back.
  6. Q "I knitted a stocking stitch garment the other day with dropped shoulders and no armhole shaping.
  7. It is therefore possible to measure around an armhole curve and compare the measurement with that of the sleeve head.
  8. Improvements to standard shapes (including trousers, armhole depth measurement).
  9. An armhole of the waistcoat went round all four of them!
  10. Having selected your sleeve / armhole type, a third menu appears for you to select your FRONT NECK type, followed by a fourth menu for the BACK NECK type (see Fig 1) Should you wish to change any of the selections you have made, just press ESCAPE until you get back to the menu that you need to alter.
  11. Whereas the STANDARD shaping section will not, for example, allow you to have a sleeve head that is too big or too small for the armhole, this is not the case with the ORIGINAL shaping section.
  12. For a decorative effect, space the ridges widely on a garment, or place on ridge level with the armhole on body and sleeves to form a yoke effect.
  13. You will be advised however, if you enter an unworkable measurement, such as a neck width that is wider than the shoulder to shoulder width, or a sleeve head that is too big for the armhole for example.

MAGIA Site Design

    Copyright © 1986-2024 VGAsoft. All rights reserved.

About USPrivacy